Great Midwest Yacht
sail boat
sail boat

STAINLESS STEEL FITTINGS

Block attachments & accessories

D-shackle  - 1" long, with screw pin. Use for vang block on boom, lifting bridle
RF622
$6.95
Eyestraps  - stamped stainless steel
small, 1 1/4" between centers, used to mount small blocks
H073
$2.15
with mounting screws
H073FB
$2.55
with stainless pop rivets
H073FA
$2.65
medium - high profile, 1 1/2" between centers. Fits Harken 150 and 365
H137
$2.90
with 1/4" bolts & elastic nuts, for mounting to 3/4" wood
H137FA
$10.00
with 1/4" bolts & elastic nuts, for mounting to 7/8" wood (knees)
H137FB
$10.00
medium - low profile,1 1/2" between centers. Fits Harken 150 and 365
H201
$2.15
Shackle 
H072
$4.30
Shackle - double hole  - couples Harken dinghy or hexaratchet block to H144 mainsheet cleat base
H093
$7.80
Sidestrap  - both mounting holes are on same side of loop. Secures blocks, lines, hiking straps when pull is from one direction
RL319
$4.50
Stanchion bale  - mounts on stanchion to anchor vang block or vang dead-end. Includes fasteners
RL317BF
$4.75
Stand-up springs 
small - for bullet blocks
H097
$0.90
large - for dinghy blocks
H071
$1.15

Pins

Mainsail tack pin  - 1/2" , fits forward boom casting
GB185
$3.85
Clevis pins  - headed stainless pins. Secures with ring-ding or cotter pin
1/4" pin - for outhaul sheave, forestay lever
RF266
$4.45
Quick-release pin  - 3/16", solid hardened-stainless pin with ball detent at one end. Caution - the hollow, center-push quick pins will break under shroud loads
medium lenght, attaches shroud to chain plate on seat
GB005
$4.25
short length, attaches shroud to shroud extender or Staymaster
GB013
$3.95
Ring-ding  - wire rings for easy attachment to clevis pins
small
GB155
$0.25
medium
GB156
$0.17

Miscellaneous

CB trunk nose plate  - fits at top front of centerboard trunk opening. Eliminates wear from line or wire
GB800
$14.00
Jib tack bolt swivel  - 1/4" bolt mounts through GMW bow plate
GC403
$15.00
S-hook  - stainless. For topping lift, lifting bridle
RF48A
$6.95
Spinnaker guy hook  - J-hook bolted through rail
RF91
$23.95
for spinnaker guy hook, pair
GB310
$3.75

Standing rigging accessories

Bow cover plate  - stainless steel plate 1 5/8 x 3 1/4"wide. 3/4" hole accepts fairlead of pigtail
GB400
$18.00
Chain plate  - secures shroud to seat horn, ea
RL352S
$7.85
chain plate and backer, pair
GX018
$27.60
Hyfield lever and keeper  - get high rig tension easily. Includes keeper to lock lever in place, all fasteners
GC402
$41.60
Hyfield lever only
GB401
$33.00
Shroud plate asembly  - includes pair of wrap-around shroud plates, plastic bushings, fasteners, and installation instructions
GB015
$27.50
Turnbuckle parts  - loose parts that somehow fall off while driving down the road
turnbuckle barrel
RL34C
$9.25
turnbuckle bottom stud and swivel fork
GB161
$12.75